Muscle Progress: Reverse Linear Wavy Periodization

Having a plan when it comes to training is known as periodization.

The term periodization often scares people. They believe that it is a super complex Soviet training plan that can only be interpreted by those with a PhD, and is reserved for the use of elite athletes. While periodization in fact originated from a Russian sports physiologist named Leo Matveyev, it is not as complicated as you think. Periodization simply means, the “planned manipulation of training variables to maximize adaptations” (Buford et al., 2007).

For you, that means having a plan to gradually adjust your training to maximize your level of hypertrophy.

Optimal periodization for hypertrophy

As mentioned earlier, any form of plan is better than none, and any form periodization is superior to none. Research supports this with several studies finding strong and significant effects of periodization. However, you don’t just want a plan. But you want a plan that optimizes everything towards your goal.
read more
Increase volume and decrease intensity

Linear reversal simply means that you gradually increase the training volume and decrease the intensity (as% 1RM) over time. Following this approach allows you to progressively overload the body through the training volume. Training volume has a dose-response relationship with hypertrophy and is the key determinant of muscle gain.

To fine-tune your inverse linear plan and maximize your hypertrophy, I suggest you incorporate elements of wavy daily periodization (DUP in English). Research indicates that undulating periodization models are superior to traditional linear models (Rhea, 2002 and Williams et al., 2017). Also, these positive effects are probably more pronounced in intermediate to advanced level lifters. At this stage of development, progress is much more difficult to achieve and the use of an optimal periodization scheme can make a difference.

The DUP concept is relatively simple. Below you can see each individual component explained:

Daily: Every day you train
Wave: Sets / Reps / Waves of Intensity Up and Down
Periodization: The long-term plan you use to progress toward your goals
When taken together, it means you have a long-term plan that undulates training loads, reps, and sets on a daily basis.

From a practical point of view, the variety provided by DUP keeps the training interesting. This is key to motivation and adherence.

The best program in the world is useless if you do not enjoy the challenge and are not motivated to give your best.

DUP a misconception

Despite its popularity, there is quite a bit of confusion about DUP. Its usefulness for weight lifting has created some confusion. Most people are aware of DUP because they have heard that some of the best powerlifters in the world use it. As a result, they think DUP is a 3-day-a-week program, requiring squats, bench press, and deadlifts in each session. They believe that DUP is only for strengthening and they believe only in it. This is all wrong!

DUP is not a single routine, established and pre-planned. It is a concept of periodization based on a general theme that allows almost infinite variations within its conceptual framework.

The undulating periodization has the benefit of allowing you to have a primary focus, while maintaining other qualities to the incorporation into the training week. In this example, hypertrophy is the goal, but strength work is included in everything. Combining this with an inverse linear model means that over time the lifted loads will have a lower relative intensity, but you will do more sets and repetitions. This protocol allows you to do increasing amounts of specific hypertrophy training.

The best of both

You can combine them to get the best of both. On a day-to-day basis it undulates, but on a macro level (the entire training block) follows a linear pattern (for example, the intensity increases and the volume decreases over several months). As a result, your programming follows a linear DUP model. Use this approach to maximize the performance of a powerlifter on the platform.

In this case we have decided on a Reverse Linear DUP (RL-DUP) model. The RL-DUP builds on this to create a powerful hypertrophy specific training methodology.

Much of the research on DUP has been based on strength results. Training for size volume should be prioritized over intensity (more support for inverse linear approach). So since size is the primary goal, you would have more volume than blocks of intensity.

FOR EXAMPLE:

Accumulation
Accumulation
Intensification
Accumulation
Accumulation
Intensification
Hypertrophy
Hypertrophy
Strength
Hypertrophy
Hypertrophy
Strength
This volume-to-intensity ratio might also be evident during a training week where multiple days are devoted to volume-style workouts , but only one day is considered a day of strength / intensity. For example,

Monday: 3 × 10
Tuesday: 4 × 8
Thursday: 5 × 5
Friday: 3 × 12
From a theoretical point of view, it is easy to defend the benefits of DUP. To build on that, seeing some real-world evidence is also a useful prop for its effectiveness. Brian Whitacre’s success does just that. When Brian won the WNBF and IFPA World Bodybuilding Championship he was trained by Dr. Zourdos (one of the world’s leading investigators in periodization and a DUP advocate) and followed a DUP scheme.

Now that we have a history of both linear wave periodization and daily wave , it’s time to bundle them into a consistent and usable training plan for hypertrophy. Below is a three month block of RL-DUP. Blocks 1 and 2 are accumulation blocks that progressively increase training volume. In block 3 the intensity is emphasized.

The training plan is set up after an upper / lower split with a ‘heavier’ day and a ‘lighter’ day each week.

Ideally, sessions would be completed on a Monday, Tuesday, Thursday, Friday, or Monday, Tuesday, Thursday, and Saturday schedule.

Block 1 – Accumulation 1

Day 1 – Heavy Superior

A1 Press Banca, 4 × 5

A2 Dominated, 4 × 5

B1 Incline Bench Press with Dumbbells, 3 × 6

B2 Dumbbell Rowing, 3 × 6

C1 Dumbbell Shoulder Press, 3 × 8

C2 Seated Neck Row Row, 3 × 8

D1 Pres Closed Grip Bench, 3 × 8

D2 Dumbbell Incline Bicep Curls, 3 × 8

Day 2 – Heavy bottom

Front squats, 4 × 6

Squats, 3 × 8

C Nordic Curl, 3 × 8

D Deadlift stiff- legged, 4 × 8

E Press machine calves, 4 × 8

Day 3 – Light Superior

A1 Incline Bench Press, 4 × 8

A2 Machine Rope Row, 4 × 8

B1 Corded Foot Openings, 3 × 10

B2 Chest Pull, 3 × 10

C1 Neck Row, 3 × 10

C2 Rope Triceps, 3 × 10

D1 Side Raises with Two Hands, 3 × 10

D2 Preacher Curl, 3 × 10

Day 4 – Light bottom

A 4 × 8 Squats

B 3 × 10 Leg Press

C Machine leg curl, 4 × 10

D 45 ° bench / lumbar hyperextension bench, 3 × 10

E Machine seated calf raise, 4 × 12

Block 2 – Accumulation 2

Day 1 – Heavy Superior

A1 Press Banca, 4 × 8

A2 Dominated (neutral), 4 × 8

B1 Dumbbell Incline Bench Press, 3 × 8

B2 Barbell Row, 3 × 8

C1 Dumbbell Shoulder Press, 3 × 10

C2 Seated Rope Mid Row, 3 × 10

French D1 Press with Rope, 3 × 10

D2 Dumbbell Biceps Curl, 3 × 10

Day 2 – Heavy Bottom

A Front Squats , 4 × 8

B Hack Squats, 3 × 10

C Machine Leg Curl, 3 × 8

D Deadlift Stiff Legs 4 × 10

E Calf Press, 4 × 10

Day 3 – Light Superior

A1 Press inclined bench, 5 × 8

A2 Low cable pulley crossing, 5 × 12

(Superseries)

B1 Rowing with rope, 5 × 8

B2 Chest pull, 5 × 12

(Superseries)

C1 Barbell neck row, 3 × 8

C2 Machine rear deltoids, 3 × 12

(Superseries)

D1 Reverse Biceps Curl with EZ Bar, 3 × 8

D2 Preacher Curl, 3 × 12

(Superseries)

E1 Rope machine

triceps , 3 × 10 E2 Diamond push

ups , 3x failure (Superset)

Day 4 – Light bottom

A1 Squats, 4 × 8

A2 Press Leg, 4 × 12

(Superseries)

B Leg extension, 3 × 15-20

C1 Curl lying down, 4 × 8

C2 Hyperextension in 45º machine, 4 × 12

(Superseries)

D Alternate lunges, 3 × 15-20 (each leg)

E1 Cufflink Press, 4 × 10

E2 Machine Seated Cufflinks, 4 × 15

(Superseries)

Block 3 – Intensification 1

Day 1 – Heavy Superior

A1 Press Banca, 6 × 4

A2 Dominated, 6 × 4

B1 Military Press, 3 × 5

B2 T-bar Rowing, 3 × 5

C1 Bottoms, 3 × 6

C2 Half Seated Rowing with Rope, 3 × 6

Day 2 – Heavy bottom

A Front squat, 6 × 4

B Deadlift stiff legs 5 × 5

D Nordic curl, 3 × 6

E Machine standing calves , 5 × 6

Day 3 – Light Superior

A1 Press bench, 4 × 6

A2 Rowing with rope, 4 × 6

B1 Dumbbell Bench Press, 3 × 8

B2 Chest Pull, 3 × 8

C1 Row paddle, 3 × 8

C2 Press bench closed grip, 3 × 8

Day 4 – Light bottom

A Snetadillas, 5 × 6

B Bulgarian single leg alternating squat, 3 × 8

C Machine leg curl, 4 × 6

D Good morning with dumbbells, 4 × 8

E Seated twins, 4 × 10

Endnotes

To be clear, the above is not the DUP. Nor is it the DUP for hypertrophy. It is just a way to structure your training using a combination of inverse linear and DUP. It adheres to the general principles of both to allow you to overload your body through training volume .

After the intensification phase, you would return to an accumulation phase. This sequence has several benefits. First, you can progressively overload using the training volume for two blocks. Then when your body begins to adapt to high volumes and experiences diminishing returns, you switch to the intensification block. At this point, your body is somewhat resistant to volume as a stimulus. Focusing on intensity, however, is a new stimulus for the body and will cause progress.

Block 3 focuses on strength development and training with lower overall volumes. During this phase, your strength will increase and will also allow the body to recover from the blows it received during the two previous high volume routines.

By the end of Phase 3, you’ll be bigger, stronger, and cooler for more high-volume hypertrophy work. Essentially, you’ve set the scene for further growth.

I love when a plan works!

What is FUE Hair Transplant

Follicular unit transfer, also known as follicular transfer is a method to obtain hair follicles, belonging to different hair types, to be used for hair transplants. It involves taking hairs from a particular part of the head, and then transferring them onto the scalp. Hairs from one area are removed while all the hairs remaining in the head remain. Follicular units or FUE, are hairs which are derived from the opposite part of scalp. Strip harvesting, on other hand, involves the removal of hairs from the head and its surrounding parts and keeping them intact.

In the standard FUE procedure surgeons make an incision that runs along the hairline, from one temple to the other in the direction of the hairline. After making the incision the surgeon pulls a strip of skin in between scalp hair and dermis.

The procedure for follicular unit transplantation depends upon a variety of factors that include the health and age that the person is in, as well as the health of the donor region and the level of the patient’s hair loss. After the strip is removed then the scalp is swaddled in a dressing , and antibiotics are given to the whole patient. A tiny cut is left behind, allowing fresh blood to flow into the scalp. The donor’s area is meticulously cleaned to prevent infection, and the operation can begin.

There are times where the transplanted follicle is not able to grow hairs in the desired areas. In these situations the doctor could decide to use follicular unit as well as cutting the skin of the patient. It will require another round of antibiotics to eliminate any bacteria, and a local anesthetic for the operation , and closing thinning.

Following the procedure your scalp might feel uncomfortably. There may be a brief decrease in the amount hairs growing on the scalp, but they should return to normality after about one week. In all instances, a visit to the doctor is recommended to be monitored as the wound might result in infection. In any case, no surgical scars will be left behind and there is no discomfort during the treatment. In fact, you will be able resume your routine as quickly as possible.

After you have finished a successful process of restoration there may be slight discomfort. When you begin growing your hair again your burning pain will fade completely. The results can differ from one person to the next. This is due to differences in body type skin color, hair type and loss pattern.

The next stage in the recovery period is the application of a specific dressing. Most often, it is constructed from cotton and is meant to protect the scalp after harvesting. You’ll also have to rest frequently (blood sucking) to flush out any blood that is not needed and medications is prescribed to prevent an infection. In addition, the harvesting process itself is conducted under anesthesia. You cannot operate a vehicle or other device during this time.

The final stage is the process of healing. The scalp will be covered with the form of a dressing. This dressing protects the scalp as well as slow down the loss of hair. After the procedure, can expect longer-term relief from receding hairlines and other visible inflicted scars.

A hair transplantation procedure does not happen overnight. It begins with the harvesting of Follicular units. The harvesting process takes place while the follicles still grow and haven’t fallen out. Following harvesting, the follicular unit is placed into a plastic bag and is covered in a new dressing. The bag is designed to allow hair to grow into the bag while the hair from the bag falls out.

The next step in the procedure will be the actual transplant. The scalp will be covered in a thin scar that will form the hairline. This scar will be unnoticeable to the naked eye and it is this invisble scar that creates the hairline.

After the extraction of the follicular unit scalp is treated with an antibiotic. The antibiotic is administered orally and helps maintain the expansion of the follicular area that was removed from patient’s scalp. This may take several weeks until the treatment is complete. The patient should not undergo any kind treatment to reduce hair loss. The final few days following the first visit to the clinic at which you received your transplant will also be used to prepare the hair follicles for the future fue procedures.

A1 Kennel Systems

If you think that it is the right time to buy some Dog Kennel Cages from a reliable Kennel Manufacturer, then you are recommended to visit the following website: a1kennelsystems.co.uk/! You will be able to check out some great, yet totally affordable non-chew dog beds, sliding hatches, dog cabins, accessories, galvanised panels and more! Just go online and search for the product that interests you most!

Stan Sutton is the person that started A1 Kennel Systems in the year of 2000 with the maingoal to achieve a high level of excellence and competence by providing solely high quality services and products (here including Dog Kennel Cages, non-chew dog beds, sliding hatches, dog cabins, accessories, galvanised panels and so on and so forth). This Kennel Manufacturer offers kennel solutions to both private customers, but also to commercial ones.

What you definitely need to know about A1 Kennel Systems’ dog cabins is the fact that they are designed especially to be non-chew, having a very rigid construction and being built on a 40mm x 40mm x 3mm angle frame, fully welded, as well as hot dip galvanised for long life. What is more, it is interesting to point out the fact that all the cabins can have night doors, front opening replacing the lift up lid. If you wish, they can be totally insulated at extra cost.

This Kennel Manufacturer’s systems have the roof slope designed in to the panel, thus providing a more attractive design than that offered by other manufacturers who do not seem to think about aesthetics. Luckily for you, with the A1 system, the entire profile is more streamlined and the slope can be either front to back or back to front, depending, of course, on sitting. What is also important is the fact that it can be built to fasten to any existing wall.

The Cheviot Kennel, for instance, is used in less exposed sites, offering plenty of protection to the cabin area. The Cheviot 1 has been created with a sole dog owner in mind, suitable for one medium sized or perhaps two smaller breeds of dog (e.g. Labrador or two Cocker Spaniels). The Cheviot 2 is extremely popular with the shooting person who is used to have more than one dog. There are enough breeders, as well as shepherds who make this choice without hesitation. If you want to know more about these Dog Kennel Cages, then feel free to visit a1kennelsystems.co.uk! You will definitely not regret it! You can even purchase fantastic and truly necessary accessories such as the “Adjustable feet” or the dog bowl holders. The last type of accessory is made out of 25×25 angle and 8mm round bar with 25×6 mm. This is just £17.50. How great is that?